AWK-3121 Series
Industrial IEEE 802.11a/b/g Wireless AP/Bridge/Client
Are your industrial applications hard to wire, or are your wiring costs out of control? Are you already using mobile equipment that connects over an IP network? If so, then what you need is the AWK-3121 Access-Point/Bridge/Client. The AWK-3121 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for wide temperature models, and is rugged enough for any harsh industrial environment. Installation is easy, with either DIN-Rail
mounting or distribution boxes. The DIN-Rail mounting capability, wide operating temperature range, and IP30 housing with LED indicators make the AWK-3121 a convenient yet reliable solution for any industrial wireless application.
Advanced Security
• 64-bit and 128-bit WEP (Wired Equivalent Privacy)
• Enable/disable SSID broadcasts
• WPA/WPA2 (Wi-Fi Protected Access) and 802.11i support
• IEEE802.1X/RADIUS support
• Powerful filters for access control
Specifications for Industrial-grade Applications
• Turbo Roaming for rapid handover during client roaming
• Long-distance data transmission over 10 km
• Integrated DI/DO for on-site monitoring and warning
• Signal strength LEDs for easy deployment and antenna alignment
Features and Benefits
• IEEE 802.11a/b/g compliant
• Power input by redundant 24 VDC power inputs or Power-over- Ethernet
• Multi-SSID and VLAN support
• Turbo Roaming for seamless wireless connections
• Long-distance communication support
• QoS (WMM) support
• -40 to 75°C operating temperature range (-T model)
< volver al listado
Relacionados
AWK-4121
Industrial IEEE 802.11a/b/g outdoor wireless AP/Bridge/Client
Introduction
The AWK-4121 outdoor wireless AP/Bridge/Client is an ideal 3-in-1 solution for industrial applications that are hard to wire, too expensive to wire, or use mobile equipment that connects to a TCP/IP network. The AWK-4121 can operate at temperatures ranging from -40 to 75°C, and its dust-tight and weatherproof design is [...]
AMPLIAR
EKI-6311G
802.11 b/g Wireless Access Point/Client Bridge
EKI-6311G features enhanced wireless transmission capabilities to provide a reliable wireless environment for industrial building systems. Moreover, a detachable antenna can collocate with any high gain antenna to enhance wireless connections even further. To protect wireless connections, EKI-6311G can encrypt transmissions through 64/128-bit WEP data encryption and also supports WPA2/WPA/802.1x [...]
AMPLIAR
EDS-516A Series
16-port managed Ethernet switches
The EDS-516A are standalone 16-port managed Ethernet switches. With their advanced Turbo Ring and Turbo Chain technology (recovery time < 20 ms) and RSTP/STP (IEEE 802.1w/D), the EDS-516A switches increase the reliability and availability of your industrial Ethernet network. Models with an wide operating temperature range of -40 to 75°C are also available, [...]
AMPLIAR
EDS-505A/508A Series
5 and 8-port managed Ethernet switches
The EDS-505A/508A are standalone 16-port managed Ethernet switches. With their advanced Turbo Ring and Turbo Chain technology (recovery time < 20 ms) and RSTP/STP (IEEE 802.1w/D), the EDS-505A/508A switches increase the reliability and availability of your industrial Ethernet network. Models with an wide operating temperature range of -40 to 75°C are [...]
AMPLIAR
AWK-6222
Industrial IEEE 802.11a/b/g outdoor dual-RF wireless AP/Bridge/Client
The AWK-6222 outdoor dual-RF wireless AP/Bridge/Client provides a flexible solution for industrial applications in a critical environment. The AWK-6222 is rated to operate at temperatures ranging from -40 to 75°C, and its dust-tight and weatherproof design is IP68-rated, allowing you to extend existing wired networks to outdoor locations. With [...]
AMPLIAR